HSCM 2000 ranges are mainly used for dedusting and polishing capsules, however HSCM 2000 can also be used for small and hard tablets. A polyamide/nylon rotative screw without end achieves a polishing in a 316L stainless steel tube. On the overall uphill conveying length suction stitchings allow powder excess to be removed.This vertical ascending device with adjustable length from 700mm to 1150mm can be equipped with a removal system for empty or opened capsules.
The “HSCM 2000” capsule dedusters are equipped with a metal particles detector. This permits reaching an optimal accuracy such as a spherical steel part of 0.3 mm in the products. A high speed rejection mechanism instantly rejects non conform products.
The construction of this special frame saves space into the production room and reduces the retention areas. In addition, the circuit of capsules is therefore totally closed between the inlet into the deduster and the outlet of the metal particles detector.
Calibration Sensitivities(Metal detector)
|Head size||Accuracy Ferrous||Accuracy Non-Ferrous||Accuracy STS 316L|
|95 x 38mm||0.3mm||0.35mm||0.5mm|
|Description||HSCM 2000||Metal Detector|
|Inlet height (A)||700mm||700mm|
|Outlet height (B)||1150mm||1000mm|
|Floor dimension(C x D)||400mm x 650mm||400mm x 650mm|
|Minimum tablets size||T-4|
|Maximum tablets size||T-00|
|Input power||220VAC, 1P, 50/60Hz,|
|material||STS304 and contact parts : STS316L|
|Capacity||Capsule T 00||220,000Caps/H|
|Capsule T 0||250,000Caps/H|
|Capsule T 1||280,000Caps/H|
|Capsule T 2||300,000Caps/H|
|Capsule T 3||380,000Caps/H|
|Capsule T 4||500,000Caps/H|